All About AC Repair Daily Digital

AC Not Working? Here's What To Do Before Calling For Repair

Jun 27

Turning the air conditioner on and finding out the unit doesn't work is definitely frustrating, especially if it's summer and you're already sweating. 


An air conditioner may not kick on for various reasons, all of which can be fixed by a licensed air conditioning technician. However, you don't have to call an AC repair tech in Plantation, FL as soon as you find out your cooling equipment doesn't run. Sometimes, the cause of the issue is quite simple to fix. This blog will discuss ways to figure out the problem and fix them before scheduling a professional AC repair service. 


1.  Check the circuit breaker


A circuit breaker is an electrical switch that protects an electrical circuit from damage caused by overload or a short circuit. It will trip when too much current flows through it, and this can happen when your AC unit and other appliances try to draw too much power.


If the circuit breaker for your AC unit has tripped, simply reset it by flipping the switch to the "on" position. If it trips again after you turn it on, then there is an issue with your air conditioner that will need to be fixed by a licensed AC repair tech in Plantation, FL.


2. Check the thermostat settings


Your AC's thermostat setting  may be why it's not coming on. Check to see if the switch is set to "cool" or "heat." If it's on "heat," your air conditioner will not turn on. Also, check the temperature setting to ensure it's set lower than the current room temperature. 


If nothing is displayed on the thermostat's screen,  the device might have been turned off, or the batteries may be dead. In this case, simply plug it in or replace the batteries. If nothing works, it may be time to get a replacement.


3. Check the condensate line for clogging


The condensate line is a small drainage tube that removes water from the AC unit. If this line becomes clogged, it may trigger the safety switch causing the air conditioner to turn off.


To clean the condensate line, start by unplugging your AC unit and removing the access panel. Locate the condensate line and use a wet/dry vacuum to suck out any debris or dirt that may be clogging it. Reattach the access panel once you've removed the blockage and plug your AC unit back in.


4. Reset your unit.


If your air conditioner still doesn't turn on, you may need to reset the unit. Simply unplug the AC unit and wait for about 30 seconds before plugging it back in. This will often do the trick and get your cooling equipment up and running again.


Some air conditioners have a reset button that you can press to reset the unit. Consult your AC's manual to see if this is the case for your unit.


These are just some  of the things you can do to troubleshoot an AC unit that doesn't turn on. If none of these solutions work, then it's time to call a professional for AC repair in Plantation, FL. An air conditioning technician will be able to quickly diagnose and fix the problem so you can enjoy cool, comfortable indoor temperatures again.


Call A Licensed Contractor For Your AC Repair Plantation, FL


When it comes to your home's comfort, don't take any chances – call a licensed AC contractor. If you're in Florida, you can count on JackRabbit Air Conditioning. They have a team of experienced and certified technicians that handles all kinds of AC work, including repair, installation, and maintenance.


Visit them online for more information or call the team at

954-807-2634 to schedule an appointment.